Technical Session Schedule

If you would like to download the technical session as PDF file, please click here

To check whether your name and paper title are correct, please check the paper index   here

 

Day 1: Tuesday 22 June 2021

Keynote 1

10.00 – 10.45

Title: The Positive Impact of Disruptive Technology in Aviation MRO Industry

Presenter: Prof. Dato’ Ir. Ts. Dr. Mohamad Dali Isa, UniKL MIAT, Malaysia

Chairperson: Prof. Dr. Meftah Hrairi, IIUM, Malaysia

Zoom Room – ICMAAE Lobby

Keynote 2

11.00 – 11.45

Title: Opportunities and Challenges in the Next Generation Light Duty Vehicle Propulsion Systems

Presenter: Ir. Azmi Osman, Proton Holdings Berhad, Malaysia

Chairperson: Prof. Ir. Dr. Masjuki Hassan, IIUM, Malaysia

Zoom Room – ICMAAE Lobby

 

Day 2: Wednesday 23 June 2021

Keynote 3

9.00 – 9.45

Title: Understanding the Requirement of Manufacturing Aerospace Workforce

Presenter: Muhamad Khalizi Bin Abdul Razak, Naluri Cindai Sdn Bhd, Malaysia

Chairperson: Prof. Dr. Waqar Asrar, IIUM, Malaysia

Zoom Room – ICMAAE Lobby

Keynote 4

9.45 – 10.30

Title:  Vehicle Safety in Malaysia After 14 Years of MIROS Establishment

Presenter: Khairil Anwar Bin Abu Kassim (Ir. Ts. Dr.), Adjunct Prof., Malaysian Institute of Road Safety Research (MIROS), Malaysia

Chairperson: Assoc. Prof. Dr. Fadly Jashi Darsivan, IIUM, Malaysia

Zoom Room – ICMAAE Lobby

Day 1: Session 1: 12:00 - 13:00 (Asia /Kuala Lumpur GMT+8)

SESSION 1 (ICMAAE ROOM A)

(Click here)

Aerodynamics & Aeroelasticity I

Paper ID:

50, 58, 1

SESSION 1 (ICMAAE ROOM B)

(Click here)

Aerodynamics & Aeroelasticity I

Paper ID:

50, 58, 1

SESSION 1 (ICMAAE ROOM C)

(Click here)

Vehicle Dynamics

& Control I

Paper ID:

24, 84, 118

SESSION 1 (ICMAAE ROOM D)

(Click here)

Thermo-Fluids I

Paper ID:

79, 39, 87

Day 1: Session 2: 14:00 - 15:40 (Asia /Kuala Lumpur GMT+8)

SESSION 2 (ICMAAE ROOM A)

(Click here)

Aerodynamics & Aeroelasticity II

Paper ID:

56, 103, 107, 82, 72

SESSION 2 (ICMAAE ROOM B)

(Click here)

Aerospace Structures I

Paper ID:

33, 124, 98, 122, 111

SESSION 2 (ICMAAE ROOM C)

(Click here)

Dynamics & Controls I

Paper ID:

46, 16, 100, 28, 25

SESSION 2 (ICMAAE ROOM D)

(Click here)

Combustion & Emission Control

Paper ID:

47, 55, 76, 63, 64

Day 2: Session 3: 16:00 - 17:20 (Asia /Kuala Lumpur GMT+8)

SESSION 3 (ICMAAE ROOM A)

(Click here)

Green Energy I

Paper ID:

73, 114, 89, 115

SESSION 3 (ICMAAE ROOM B)

(Click here)

Vehicle Structures & Crashworthiness

Paper ID:

35, 44

SESSION 3 (ICMAAE ROOM C)

(Click here)

Structures &

Materials II

Paper ID:

68, 32, 71, 23

SESSION 3 (ICMAAE ROOM D)

(Click here)

Thermo-Fluids II

Paper ID:

38, 93, 94, 15

Day 2: Session 4: 10:45 - 11:45 (Asia /Kuala Lumpur GMT+8)

SESSION 4 (ICMAAE ROOM A)

(Click here)

Aerodynamics
& Aeroelasticity III

Paper ID:

67, 108, 91

SESSION 4 (ICMAAE ROOM B)

(Click here)

Aerospace

Structures
II

Paper ID:

70, 127, 95

SESSION 4 (ICMAAE ROOM C)

(Click here)

Green
Energy II

Paper ID:

52, 74, 18

SESSION 4 (ICMAAE ROOM D)

(Click here)

Internet
of Things

Paper ID:

88, 62

Day 2: Session 5: 12:00 - 13:40 (Asia /Kuala Lumpur GMT+8)

SESSION 5 (ICMAAE ROOM A)

(Click here)

Aerospace Propulsion

Paper ID:

119, 106, 101

SESSION 5 (ICMAAE ROOM B)

(Click here)

Structures &

Materials III

Paper ID:

17, 14, 96

SESSION 5 (ICMAAE ROOM C)

(Click here)

Vehicle Dynamics

& Controls II

Paper ID:

21, 51, 105

SESSION 5 (ICMAAE ROOM D)

(Click here)

Special Topics

Paper ID:

19, 37, 86

Day 2: Session 6: 14:00 - 15:40 (Asia /Kuala Lumpur GMT+8)

SESSION 6 (ICMAAE ROOM A)

(Click here)

Aerodynamics & Aeroelasticity IV

Paper ID:

113, 80, 99, 92, 85

SESSION 6 (ICMAAE ROOM B)

(Click here)

Structures &

Materials IV

Paper ID:

78, 60, 117, 20, 22

SESSION 6 (ICMAAE ROOM C)

(Click here)

NDT

Paper ID:

61, 121, 123, 116, 125

SESSION 6 (ICMAAE ROOM D)

(Click here)

Special Topics

Paper ID:

66, 77, 53, 126, 54

Day 2: Session 7: 16:00 - 17:20 (Asia /Kuala Lumpur GMT+8)

SESSION 7 (ICMAAE ROOM A)

(Click here)

Modelling & Simulation

Paper ID:

65, 45, 42, 69

SESSION 7 (ICMAAE ROOM B)

(Click here)

Aerospace

Structures III

Paper ID:

109, 110, 128, 112

SESSION 7 (ICMAAE ROOM C)

(Click here)

Structures &

Materials V

Paper ID:

27, 57, 34, 83

SESSION 7 (ICMAAE ROOM D)

(Click here)

Structures &

Materials VI

Paper ID:

75, 59, 104

Back to the top

SESSION 1 (ICMAAE ROOM A)

Aerodynamics & Aeroelasticity

Tuesday, June 22: 12:00 – 1.00pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Assoc. Prof. Dr. Erwin Sulaeman

Asst. Prof. Dr. Nur Azam Bin Abdullah

12.00 – 12.20 pm

Khaoula Qaissi1, Omer Elsayed1, Mustapha Faqir1 and Elhachmi Essadiqi1
ICMAAE21-50: A Validation Study of The Aerodynamic Behaviour of the NREL Phase VI Wind Turbine: Three-Dimensional Rotational Case

1Université Internationale de Rabat

12.20 – 12.40 pm

S. Boughou1,  A. Omar1, O. Elsayed1 and M. Aldheeb2

ICMAAE21-58: Numerical Investigations of Aerodynamic Characteristics of High-lift Low Reynolds Number S1223 Airfoil

1International University of Rabat, 2International Islamic University Malaysia

12.40 – 1.00 pm

Afaq Altaf1, Mohammed Abdulmalek Mohammed Aldheeb2, Ashraf Ali Omar3, Waqar Asrar2
ICMAAE21-1: Effect of Roll Angle Configurations of a Reverse Delta Type Add-on Device on Wing tip Vortex Alleviation

1New York Institute of Technology, 2International Islamic University Malaysia,

3International University of Rabat

Back to the top

SESSION 1 (ICMAAE ROOM B)

Structures & Materials I

Tuesday, June 22: 12:00 – 1.00pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Assoc. Prof. Dr. Jaffar Syed Mohamed Ali

Asst. Prof. Dr. Hanan Mokhtar

12.00 – 12.20 pm

Nasr Bekraoui, Zakaria El Qoubaa, Hajar Chouiyakh, Mustapha Faqir and Elhachmi Essadiqi
ICMAAE21-41: The interaction between Mechanical properties, geometry and chemical content of Natural Fibres: A statistical exploratory analysis

1Université Internationale de Rabat

12.20 – 12.40 pm

Ir.Kuganeswaran Nadarasa, Dr.Afikah Rahim and Prof. Dr. Nazri Ali
ICMAAE21-102: Ground Improvement Using Prefabricated Vertical Drains (PVDs) and Validation by Plaxis 3D – A Case Study

Universiti Teknologi Malaysia

12.40 – 1.00 pm

Adib Hamdani1,2*, Pankaj Pankaj2
ICMAAE21-97: Numerical Simulation of Impacted Elastic Bar

1International Islamic University Malaysia, 2The University of Edinburgh

Back to the top

SESSION 1 (ICMAAE ROOM C)

Vehicle Dynamics & Control

Tuesday, June 22: 12:00 – 1.00pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Prof. Dr. Waleed Fekry Faris

Asst. Prof. Dr. Muhammad Bin Abdullah

12.00 – 12.20 pm

Mohd Azri Abd Mutalib1, Norsinnira Zainul Azlan2
ICMAAE21-24: Development of Lab Scale maveP Mobility Prototype

1SIRIM Berhad, 2International Islamic University Malaysia

12.20 – 12.40 pm

Mohamed Al-Sideque Zainuddin1, Muhammad Abdullah2, Salmiah Ahmad2, Ataur Rahman2
ICMAAE21-84: Performance Comparison between Predictive Functional Control and PID Algorithms for an Automobile Cruise System

1Kolej Kemahiran Tinggi MARA, Melaka, 2International Islamic University Malaysia

12.40 – 1.00 pm

Nur Hanisah Azmi1, Ali Sophian1, Ali Aryo Bawono2
ICMAAE21-118: Detection of Road Lane Markings for Road Inspection by using Deep Learning

1International Islamic University Malaysia, 2TUMCREATE Ltd Singapore

Back to the top

SESSION 1 (ICMAAE ROOM D)

Structures & Materials I

                                       Tuesday, June 22: 12:00 – 1.00pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr.Syed Noh Syed Abu Bakar

Assoc. Prof. Dr. Moumen Mohammed Idres

12.00 – 12.20 pm

Nawal Achak, Ouafae Rkibi, Bennasser Bahrar and Kamal Gueraoui
ICMAAE21-79: Investigation of Quasi-Steady Friction in Viscoplastic Fluid Flow in a Pipe

Morocco

12.20 – 12.40 pm

A. H. Hamisa1,2, W. H. Azmi1 , T. M. Yusof1, M.F. Ismail1,3 , A.I. Ramadhan1,4
ICMAAE21-39: Rheological Properties of TiO2/POE Nanolubricant For Automotive Air-Conditioning System

1Universiti Malaysia Pahang, 3University College of Yayasan Pahang, 3Universiti
Teknikal Malaysia Melaka,4Universitas Muhammadiyah Jakarta

12.40 – 1.00 pm

Suaib Al Mahmud1, Ahmad Faris Ismail1
ICMAAE21-87: Multiphase CFD Investigation on Convective Heat Transfer Enhancement for Turbulent Flow of Water-Al2O3 Nanofluid

1International Islamic University Malaysia

Back to the top

Day 1: Session 2

SESSION 2 (ICMAAE ROOM A)

Aerodynamics & Aeroelasticity II

Tuesday, June 22: 2:00 – 3:40pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Nur Azam Bin Abdullah

Asst. Prof. Dr. Mohamed Aldheeb

2.00 – 2.20 pm

Fatima-zahra Hachimy1, Ashraf A. Omar1, Omer Elsayed1
ICMAAE21-56: The Accuracy of the Numerical Solution in Predicting Ahmed Body Components Drag Coefficients

1International University of Rabat

2.20 – 2.40 pm

Mohamed Ibren1, Amelda Dianne1,*, Waqar Asrar1, Erwin Sulaeman1
ICMAAE21-103: Laminar Separation Bubble and Flow Topology of NACA 0015 at Low Reynolds Number

1International Islamic University Malaysia

2.40 – 3.00 pm

Erwin Sulaeman, Mohamed Ibren, Amelda Dianne and Adri Zainal Abidin
ICMAAE21-82: Influence of Surface Discontinuity on Sound Absorption Coefficient of Vehicle Interior Material

International Islamic University Malaysia

3.00 – 3.20 pm

Nur Azam Abdullah*, Nor Izzuddin Ismail, Izham Izzati Ismail,Muhammad Hanafi Azami, Norhuda Hidayah Nordin, Nor Aiman Sukindar, Ahmad Joahari Abu Bakar, Noriza Dani
ICMAAE21-72: Aerodynamic assessment and development of Smokey SAM Prototype (TRL-6)

International Islamic University Malaysia

3.20 – 3.40 pm

 

Back to the top

SESSION 2 (ICMAAE ROOM B)

Aerospace Structures I

Tuesday, June 22: 2:00 – 3:40pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Prof. Dr. Meftah Hrairi

Assoc. Prof. Dr. Salmiah Ahmad

2.00 – 2.20 pm

El Arbi Hajjioui1, Mustapha Faqir1, Kenza Bouchaâla1,2, Elhachmi Essadiqi1, Mounia Malki1
ICMAAE21-33: A review of precipitation, mechanical properties and additive manufacturing for the third generation of Aluminum Lithium alloys used in aeronautic applications

1International University of Rabat, 2Mohammed V University

2.20 – 2.40 pm

Mohamed Djemana1, Rania Benyoucef2, Meftah Hrairi3
ICMAAE21-124: Numerical modelling and applied simulation for the vibration monitoring of a ventilation turbine

1 École Supérieure de Technologies Industrielles, 2University of Batna,

3International Islamic University Malaysia

2.40 – 3.00 pm

Adnan Akhlaq, Mohd. Sultan Ibrahim Shaik Dawood, Mohamed Ali Jaffar Syed and Erwin Sulaeman
ICMAAE21-98: A Review on the Effect of Higher-Order Nonlinear Theories on the Analysis of Piezoelectric Laminates

International Islamic University Malaysia

3.00 – 3.20 pm

Tejal Ikhar, Shubham Gadhave and Sagar Lone
ICMAAE21-122: Structural Analysis of Bolted Nozzle Flange of Saturn V Rocket Engine

India

3.20 – 3.40 pm

Mohamed Ali Jaffar Syed and Afiq Safwan Ahmad Afandi
ICMAAE21-111: Educational Software for Stress Analysis of Tapered Multi-Spar Wings with Multi-Booms

International Islamic University Malaysia

Back to the top

SESSION 2 (ICMAAE ROOM C)

Dynamics & Controls

 

Tuesday, June 22: 2:00 – 3:40pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Assoc. Prof. Dr. Mohamed El Sayed Aly Abd El Aziz Okasha

Asst. Prof. Dr. Alia Farhana Binti Abdul Ghaffar

 

 

 

2.00 – 2.20 pm

Nor Mohd Haziq Norsahperi1, Salmiah Ahmad2, Siti Fauziah Toha2, Mohd Azri Abd Mutalib3
ICMAAE21-46: Design, Simulation and Experiment of PSO-tuned FOPID Controller for Height Position Control of a Scissor Mechanism Platform

1University Putra Malaysia, 2International Islamic University Malaysia, 3SIRIM Berhad

2.20 – 2.40 pm

Ibrahim Mustafa Mehedi, Mohd Heidir Mohd Shah and Salmiah Ahmad

ICMAAE21-16: Linear Positional and Speed Control of Servo Cart using Inverse Dynamic Control

Sarabia

2.40 – 3.00 pm

Yazan Aljeroudi, Erwin Sulaeman and Ari Legowo
ICMAAE21-100: Dynamic Fingerprint Benchmarking Model for WiFi Indoor localization

International Islamic University Malaysia

3.00 – 3.20 pm

Norsinnira Zainul Azlan and Hiroshi Yamaura
ICMAAE21-28: Adaptive Force-Tracking Impedance Control for Unknown Time-Varying Environment

International Islamic University Malaysia

3.20 – 3.40 pm

 

Back to the top

SESSION 2 (ICMAAE ROOM D)

Combustion & Emission Control

Tuesday, June 22: 2:00 – 3:40pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Sanisah Saharin

Asst. Prof. Dr. Tengku Nordayana Akma Binti Tuan Kamaruddin

2.00 – 2.20 pm

Amzar Zulkifli Syahir, Haji Hassan Masjuki, Mohd Nur Ashraf Yusoff and Tengku Muhammad Ibrahim
ICMAAE21-47: Frictional Power Evaluation of Additive-Mixture in Trimethylolpropane Trioleate Oil using Single Cylinder Diesel Engine

1University of Malaysia

2.20 – 2.40 pm

Ameer Suhel1, Norwazan Abdul Rahim1, Mohd Rosdzimin Abdul Rahman1, Khairol Amali Bin Ahmad1, Umrah Khan2,
Yew Heng Teoh3, Noh Zainal Abidin1
ICMAAE21-55: Impact of ZnO nanoparticles as additive on performance and emission characteristics of a diesel engine fueled with waste plastic oil: An experimental investigation

1Universiti Pertahanan Nasional Malaysia, 2Jawaharlal Nehru Technological
University-Hyderabad, 3Universiti Sains Malaysia

2.40 – 3.00 pm

Nasrul Ilminnafik1, Mustapa1, Faiz Firdausi3, Luluk Fitri Yani1, Intan Hardiatama1, Ahmad Adib Rosadi1, Andi Sanata1
ICMAAE21-76: Spray Characteristics of a mixture of biodiesel and ethanol fuel

1Universiti of Jember

3.00 – 3.20 pm

Amir Shahidi Bin Zaidy and Tengku Nordayana Akma Binti Tuan Kamaruddin
ICMAAE21-63: Effects of Different Engine Oil Types on Engine Performance and In-cylinder Combustion

International Islamic University Malaysia

3.20 – 3.40 pm

Muhammad Hadzim Bin Zulimran and Tengku Nordayana Akma Binti Tuan Kamaruddin
ICMAAE21-64: Effects of Different Fuel Additive Quantity on Engine Performance and In-cylinder Combustion

International Islamic University Malaysia

Back to the top

Day 1: Session 3

SESSION 3 (ICMAAE ROOM A)

Green Energy I

Tuesday, June 22: 4:00 – 5.20pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Nabilah Ramli

Prof. Dr. Waleed Fekry Faris

4.00 – 4.20 pm

Ataur Rahman
ICMAAE21-73: Activated Carbon-ZnO/CuO Conductive Polymer Structural Electric Vehicle Energy Storage System

International Islamic University Malaysia

4.20 – 4.40 pm

Revichandran Rajeanderan, Mohamed Ali Jaffar Syed, Mohiuddin A.K. M. and Moumen Idres

ICMAAE21-114: Energy Usage Efficiency, Optimization and Energy Conservation in Malaysian Universities

International Islamic University Malaysia

4.40 – 5.00 pm

Muhammad Faiz Ahmad Fauzi and Muhammad Saifuddin Mohamed Rehan
ICMAAE21-89: Study on Impact of Motorcycle Ride Hailing Service on Energy Consumption and GHG Emission in Land Transport in Malaysia

International Islamic University Malaysia

5.00 – 5.20 pm

Faleh F.F. Hujailan1, Md Abdul Maleque1, Md Mustafizur2
ICMAAE21-115: Energy Efficiency and Optimization in Buildings for Sustainable Development in Malaysia

1International Islamic University Malaysia, 2Universiti Malaysia Pahang

Back to the top

SESSION 3 (ICMAAE ROOM B)

Vehicle Structures & Crashworthiness

Tuesday, June 22: 4:00 – 5.20pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Hanan Mokhtar

Assoc. Prof. Dr. Mohd Sultan Ibrahim

4.00 – 4.20 pm

Mohd Hafiz Johari1,2*, Khairil Anwar Abu Kassim2, Yahaya Ahmad2, Sharifah Nabilah Nursyuhada
Syed Muhaimin2, Mohd Radzi Abu Mansor1
ICMAAE21-35: Crashworthiness of Light Cab Commercial: A Systematic Review

1Universiti Kebangsaan Malaysia

4.20 – 4.40 pm

Mohd Zuhaifi Zainol1, Zubair Khalil1
ICMAAE21-44: Effect Of Stress Severe Shot Peening On Fatigue Performance Of Coil Spring

1Universiti Malaysia Pahang

4.40 – 5.00 pm

 

 

 

 

Back to the top

SESSION 3 (ICMAAE ROOM C)

Structures & Materials II

Tuesday, June 22: 4:00 – 5.20pm (Asia / Kuala Lumpur GMT +8

Chairman

Co- chairman:

Asst. Prof. Dr. Muhammad Hanafi Azami

Asst. Prof. Dr. Adib Hamdani Bin Rosli

4.00 – 4.20 pm

Sara Bendrhir, Kenza Bouchaala, Lahcen Azrar and Elhachmi Essadiqi
ICMAAE21-68: Numerical simulation of thickness distribution during deep drawing process

Morocco

4.20 – 4.40 pm

Salina Budin1, Normariah Che Maideen1, Koay Mei Hyie1, Hamid Yusoff1, Halim Ghafar1,

ICMAAE21-32: Comparative Study on Degradation of Polylactic Acid/ Syzygium Aromaticum Composites Ageing in Natural Weathering and Soil Burial

1Universiti Teknologi MARA

4.40 – 5.00 pm

Farid Othman1,2, Nur Azam Abdullah1 , Erwin Sulaeman1, Sher Afghan Khan1
ICMAAE21-71: Dosing Rate Assessment of Lime Dosage in Water Treatment Application Utilising Pneumatic System

1International Islamic University Malaysia, 2Aqua Oleo Sdn Bhd

5.00 – 5.20 pm

Wazed Ibne Noor1, Tanveer Saleh1, Mir Akmam Noor Rashid1 and Azhar Bin Mohd Ibrahim1
ICMAAE21-23: Effect of Process Parameters on the Laser Microdrilling Performance Of Stainless Steel, Aluminium and Copper

1International Islamic University Malaysia

Back to the top

SESSION 3 (ICMAAE ROOM D)

Thermo-Fluids II

Tuesday, June 22: 4:00 – 5.20pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Assoc. Prof. Dr. Moumen Mohammed Idres

Asst. Prof. Dr. Mohd Farid Bin Aladdin

4.00 – 4.20 pm

M.F. Ismail1,2, W. H. Azmi1, R. Mamat1, A.H. Hamisa1,3
ICMAAE21-38: Investigation of Newtonian Behaviour and Dynamic Viscosity of TiO2/PVE Nanolubricants for Refrigeration System

1Universiti Malaysia Pahang, 2Universiti Teknikal Malaysia Melaka,
 3University College of Yayasan Pahang

4.20 – 4.40 pm

Zairul Azrul Zakaria1, Zafri Azran Abdul Majid1, Muhammad Amin Harun1 , Ahmad Faris Ismail1 , Sany Izan Ihsan1,
Kamaruzzaman Sopian2 , Amir Abdul Razak3, Ahmad Fadzil Sharol3

ICMAAE21-93: Experimental Investigation of Integrated Energy Storage on Thermal Performance Enhancement of Evacuated Glass-Thermal Absorber Tube Collector (EGATC) for Air Heating Application

1International Islamic University Malaysia, 2Universiti Kebangsaan Malaysia,
 3Universiti Malaysia Pahang

4.40 – 5.00 pm

Muhammad Amin Harun1, Zafri Azran Abdul Majid1, Zairul Azrul Zakaria1 , Ahmad Faris Ismail1 , Sany Izan Ihsan1,
Kamaruzzaman Sopian2 , Amir Abdul Razak3, Ahmad Fadzil Sharol3
ICMAAE21-94: Analysis Performance of Flat Plate Base-Thermal Cell Absorber (FPBTCA): Low Thickness Design

1International Islamic University Malaysia, 2Universiti Kebangsaan Malaysia,
 3Universiti Malaysia Pahang

5.00 – 5.20 pm

Faleh F.F. Hujailan1, Md Abdul Maleque1* and Md Mustafizur2
ICMAAE21-15: Comparative Study on Performance of Flat Plate and Evacuated Tube Collectors Solar Water Heater System

1International Islamic University Malaysia, 2Universiti Malaysia Pahang

Back to the top

Day 2: Session 4

SESSION 4 (ICMAAE ROOM A)

Aerodynamics & Aeroelasticity III

Wednesday, June 23: 10:45 – 11.45am (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Alia Farhana Binti Abdul Ghaffar

Asst. Prof. Dr. Amelda Dianne Andan

10.45 – 11.05 am

Hindawan Hariowibowo1,2, Ony Arifianto1, Hisar Manongam Pasaribu1, Hari Muhammad1
ICMAAE21-67: Detection and Prevention of Pilot-Induced-Oscillation on Flighter Aircraft Fxx During Design Phase

1Insititut Teknologi Bandung, 2Indonesian Aerospace

11.05 – 11.25 am

Izham Izzat Ismail1, Nur Husnina Aufa Rozainuddin1, Norhuda Hidayah Nordin1, Muhammad Hanafi Azami1
ICMAAE21-91: Computational Fluid Dynamics Modelling of Hybrid Rocket Flow-Fields

1International Islamic University Malaysia

11.25 – 11.45 am

 

 

Back to the top

SESSION 4 (ICMAAE ROOM B)

Aerospace Structures II

Wednesday, June 23: 10:45 – 11.45am (Asia / Kuala Lumpur GMT +8

Chairman

Co- chairman:

Asst. Prof. Dr. Wan Luqman Hakim Bin Wan Abdul Hamid

Asst. Prof. Dr. Muhammad Saifuddin Mohd Rehan

10.45 – 11.05 am

Sharis-Shazzali Shahimi, Nur Azam Abdullah, Ameen Topa, Meftah Hrairi and Ahmad Faris Ismail
ICMAAE21-70: Numerical modelling of bird strike on a rotating engine blades based on variations of porosity density

International Islamic University Malaysia

11.05 – 11.25 am

Mumtahina Rahnuma1, Md. Mehadi Hassan Chowdhury2, Nihal Ahmed3, Ashfaq Ahmed4
ICMAAE21-127: Structural Analysis of Continuous I Beam of Steel with Crack Using Finite Element Simulation

1Rajshahi University of Engineering & Technology, 2Sylhet Engineering College,
3National Nanotechnology Research Center, 4University of CaliforniaXX

 

11.25 – 11.45 am

A. M. Asif1, Norfazrina H. M. Yatim1
ICMAAE21-95: Effect Of Wing Skin Thickness And Material On The Stresses In Aircraft Wing Structure

1International Islamic University Malaysia

Back to the top

SESSION 4 (ICMAAE ROOM C)

Green Energy II

Wednesday, June 23: 10:45 – 11.45am (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Tengku Nordayana Akma Binti Tuan Kamaruddin

Prof. Dr. Mohammed Ataur Rahman

10.45 – 11.05 am

Nur Fadiah Mohd Zawawi1, Mohd Rafi Yaacob1, Sazali Abd Wahab2, Khairil Wahidin Awang1, Muhammad Ehsan Mohd Eidris3
ICMAAE21-52: Green Vehicle, Incentives and Policies: A View from Logistics Companies in Malaysia

1Universiti Malaysia Kelantan, 2Universiti Putra Malaysia, 3Petroliam Nasional Berhad (Petronas)

11.05 – 11.25 am

Ataur Rahman, Sany Ihsan, Muhammad Abdullah, Salmiah Ahmad and Alia Farhana Abdul Ghaffar
ICMAAE21-74: Fuel Cell Hybrid Technology for the Retrofitting Electric Shutle Bus

International Islamic University Malaysia

11.25 – 11.45 am

Nurul Ilya Basharuddin, Wan Luqman Hakim Wan A Hamid and Nor Aiman Sukindar
ICMAAE21-18: Adaptive Solar Panel

International Islamic University Malaysia

Back to the top

SESSION 4 (ICMAAE ROOM D)

Internet of Things

Wednesday, June 23: 10:45 – 11.45am (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Muhammad Bin Abdullah

Asst. Prof. Dr. Hilmi Hela Ladin

10.45 – 11.05 am

Ataur Rahman
ICMAAE21-88: Artificial Intelligent IoT Braking System for Passenger Vehicle

International Islamic University Malaysia

11.05 – 11.25 am

Mohd Firdaus Shamsuddin and Muhammad Hanafi Azami
ICMAAE21-62: Design and Prototyping of IoT Edge Device for Vibrational Study of Drilling Process of Advanced Composite Manufacturing in Aerospace Industry

International Islamic University Malaysia

11.25 – 11.45 am

 

Back to the top

Day 2: Session 5

SESSION 5 (ICMAAE ROOM A)

Aerodynamics & Aeroelasticity III

Wednesday, June 23: 12:00 – 1.00pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Prof. Dr. Sher Afghan Khan

Assoc. Prof. Dr. Jaffar Syed Mohamed Ali

12.00 – 12.20 pm

Mahammadsalman Warimani 1, Muhammad Hanafi Azami 1, Sher Afghan Khan1, Ahmad Faris Ismail1, Sanisah Saharin1,
Ahmad Kamal Ariffin2, and Vijaykumar Chavan3
ICMAAE21-119: Analytical Assessment of Blended Fuels for Pulse Detonation Engine Performance

1International Islamic University Malaysia, 2Universiti Kebangsaan Malaysia,  3Smt. Kamala & Sri Venkappa
M. Agadi College of Engineering & Technology

12.20 – 12.40 pm

Moumen Idres1 and Muhamad Adi Muqri Saiful Azmi1
ICMAAE21-106: Computational Prediction of The Performance Map of A Transonic Axial Flow Rotor

1International Islamic University Malaysia  

12.40 – 1.00 pm

Izham Izzat Ismail1, Norhuda Hidayah Nordin1, Muhammad Hanafi Azami1, Nur Azam Abdullah1
ICMAAE21-101: Metals and Alloys Additives as Enhancer for Rocket Propulsion

1International Islamic University Malaysia  

Back to the top

SESSION 5 (ICMAAE ROOM B)

Structures & Materials III

Wednesday, June 23: 12:00 – 1.00pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Muhammad Saifuddin Mohd Rehan

Asst. Prof. Dr. Muhammad Hanafi Azami

12.00 – 12.20 pm

Normariah Che Maideen1, Mohd Ikmal Hisham Abdul Rahim1, Salina Budin1, Koay Mei Hyie1, Hamid Yusoff1
ICMAAE21-17: Effect Of Layer Thickness On Repeatability Of 3D Printed Pla Parts Produced Using Openware 3D Printer

1Universiti Teknologi MARA

12.20 – 12.40 pm

Mohd Khairul Efni Norman and Mohd Yussni Hashim
ICMAAE21-14: Tensile Strength Of Single Banana Fibers (SBFs) Improved By Novel Alkaline Treatment

Universiti Tun Hussein Onn

12.40 – 1.00 pm

Adib Hamdani1,2, Pankaj Pankaj2
ICMAAE21-96: A Closed-Form Solution Of Drop Test On An Elastic Bar: Benchmarking Force Response Of The Restrained Bar to Impact

1International Islamic University Malaysia, 2The University of Edinburgh

Back to the top

SESSION 5 (ICMAAE ROOM C)

Vehicle Dynamics & Control II

Wednesday, June 23: 12:00 – 1.00pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Prof. Dr. Mohammed Ataur Rahman

Assoc. Prof. Dr. Mohamed El Sayed Aly Abd El Aziz Okasha

12.00 – 12.20 pm

Syamsul Azrin Kamaruddin1, Hairulazwan Hashim1,  Halim Mamat2, Norhafiza Samion1, Ida Aryanie Bahrudin1, Abdul Halim Omar1, Mohd Faizal Mohamed Noor1
ICMAAE21-21: Vimps: Visualization of Power Supervisory Control and Data Acquisition (SCADA) Event Log for Efficient Railway Monitoring

1Universiti Tun Hussein Onn Malaysia, 2Keretapi Tanah Melayu Berhad

12.20 – 12.40 pm

Mohamad Nazmi1, Mohamed Okasha1,2, Aizat Aasim1,2, Moumen Idres1
ICMAAE21-51: Monitoring The IIUM River using Unmanned Aerial Vehicle and Image Classification

1International Islamic University Malaysia, 2United Arab Emirates University

12.40 – 1.00 pm

Muhammad Abdullah1, Moumen Idres1, Mohd Azan 1
ICMAAE21-105: Model Predictive Control for Regulating Fuel Cell Stack Temperature and Air Flow Rate

1International Islamic University Malaysia

Back to the top

SESSION 5 (ICMAAE ROOM D)

Special Topics I

Wednesday, June 23: 12:00 – 1.00pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Mohd. Azan Mohammed Sapardi

Asst. Prof. Dr. Fatimah Dzaharudin

12.00 – 12.20 pm

Mohammed Rafeeq1, Siti Fauziah Toha1, Salmiah Ahmad1, Mohd Asyraf Mohd Razib1  
ICMAAE21-19: Virtual Prototype-Based Kinematic Modeling and Simulation of A Multi-Mode Amphibious Robot

1International Islamic University Malaysia

12.20 – 12.40 pm

Nurul Nafisah Kamis1, Salmiah Ahmad1, Abd. Halim Embong1, Erwin Sulaeman1
ICMAAE21-37: Error driven Fuzzy Logic Controller (FLC) for Spherical Mobile Robot: Simulation & Experimental Performance Analysis

1International Islamic University Malaysia

12.40 – 1.00 pm

Assadullah, M, Khan, Sher Afghan and Sulaeman, E.
ICMAAE21-86: High-Speed Tunnels: A Futuristic Approach

International Islamic University Malaysia

Back to the top

Day 2: Session 6

 

SESSION 6 (ICMAAE ROOM A)

Aerodynamics & Aeroelasticity IV

Wednesday, June 23: 2:00 – 3.40pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Mohamed Aldheeb

Prof. Dr. Sher Afghan Khan

2.00 – 2.20 pm

Muhammad Hafiz M. Shaari and Mohamed Ali Jaffar Syed
ICMAAE21-113: Aerodynamics of Oblique Wing Configuration

International Islamic University Malaysia

2.20 – 2.40 pm

Erwin Sulaeman

ICMAAE21-80: Accurate Critical Mach Number Approximation of Airfoil in Compressible Flow

International Islamic University Malaysia

2.40 – 3.00 pm

Izham Izzat Ismail1 and Muhammad Hanafi Azami1
ICMAAE21-92: Thrust Chamber Dynamic and Propulsive Performance of Biofuels Under Detonation Combustion

1International Islamic University Malaysia

3.00 – 3.20 pm

Nur Marissa Kamarul Baharin, Ahmad Hussein Abdul Hamid, Syed Noh Syed Abu Bakar
and Mohd Azan Mohammed Sapardi
ICMAAE21-85: Study on Flow Structure Behind Multiple Bluff Bodies in a Tandem Arrangement under the Effect of Magnetic Field

International Islamic University Malaysia

3.20 – 3.40 pm

 

Back to the top

SESSION 6 (ICMAAE ROOM B)

Structures & Materials IV

Wednesday, June 23: 2:00 – 3.40pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Adib Hamdani Bin Rosli

Asst. Prof. Dr. Wan Luqman Hakim Bin Wan Abdul Hamid

2.00 – 2.20 pm

Mouad Bellahkim1, Ahmed Ouezgan1, Youssef Benbouras1,  Aziz Maziri1, El hassan Mallil1 and Jamal Echaabi1
ICMAAE21-78: 3D finite element analysis of laminated composites under three-point bending

1University of Casablanca

2.20 – 2.40 pm

C. K. Ng1, K.Y. Sara Lee1, C. H. Tan1, S. Ramesh2,3, C. Y. Tan2, C. H. Ting4, Y. D. Chuah4 And U. Sutharsini7

ICMAAE21-60: Characterization and Sintering Properties of Hydroxyapatite Bioceramics Synthesized from Biowaste

1Tunku Abdul Rahmani University College, 2Universiti Malaya, 3Universiti Teknologi Brunei,
 4Universiti Tunku Abdul Rahman, 5University of Jaffna

2.40 – 3.00 pm

Renita S. Monis1,3, Asha Crasta2, Sher Afghan Khan2, Shamitha1, Anitha D. Bayar1, Erwin Sulaeman2
ICMAAE21-130: Comparative Study Of Quasi Steady And Unsteady Damping Derivatives For Delta  Wings In Hypersonic  Flow

1Mangalore Institute of Technology and Engineering, 2International Islamic University Malaysia, 3SMVITKM, Bantakal India

3.00 – 3.20 pm

Altamashuddinkhan Nadimalla1, Siti Aliyyah Masjuki1, Siti Asmahani Saad1, Maisarah Ali1
ICMAAE21-20: Machine Learning Model to Predict Slum, Vebe and Compaction Factor of M Sand and Shredded Pet Bottles Concrete

1International Islamic University Malaysia

3.20 – 3.40 pm

Wan Ahmad Bin Wan Azhar1, Tanveer Saleh2*, Mohd Asyraf Bin Mohd Razib3
ICMAAE21-22: Development of Micro-EDM Machine with Process Parameter Control for Micro-EDM Drilling

1International Islamic University Malaysia

Back to the top

SESSION 6 (ICMAAE ROOM C)

NDT

 

Wednesday, June 23: 2:00 – 3.40pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Norfazrina Hayati Binti Mohd Yatim

Asst. Prof. Dr. Mohd. Azan Mohammed Sapardi

2.00 – 2.20 pm

A. Saouab1, H. Chouiyakh1, M. Faqir1, K. Bouchaala1, M.F. Ghanameh1, E. Essadiqi1
ICMAAE21-61: Investigation of Multistage Damage Detection Based on Lamb Waves

1Université Internationale de Rabat

2.20 – 2.40 pm

Mohamed Djemana1, Meftah Hrairi2 and Norfazrina H. M. Yatim2
ICMAAE21-121: Numerical Simulation of Electromechanical Impedance-Based Damage Monitoring of Metallic Structures

1École Supérieure de Technologies Industrielles, 2International Islamic University Malaysia

2.40 – 3.00 pm

Mohamed Djemana1, Meftah Hrairi2 and Norfazrina H. M. Yatim2
ICMAAE21-123: Temperature Influence on Electromechanical Impedance Method Used for Damage Detection in Metallic Structure

1École Supérieure de Technologies Industrielles, 2International Islamic University Malaysia

3.00 – 3.20 pm

Mohamoud Hussein Mohamed1, Ali Sophian1, Nadzril Sulaiman1, Erry Yulian Triblas Adesta1
ICMAAE21-116: Tunnel-Magnetoresistive-Based Pulsed Eddy Current Probe for Inspection of Corrosion Under Insulation

1International Islamic University Malaysia

3.20 – 3.40 pm

Sabir Beroual, Meftah Hrairi and Mohd Sultan Ibrahim Shaik Dawood
ICMAAE21-125: Structural Finite Element Analysis for Crack Detection in Silicon Plate Using EMI Technique

International Islamic University Malaysia

Back to the top

SESSION 6 (ICMAAE ROOM D)

Special Topics II

Wednesday, June 23: 2:00 – 3.40pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Hilmi Hela Ladin

Assoc. Prof. Dr. Erwin Sulaeman

2.00 – 2.20 pm

Mohamed Ibren1, Amelda Dianne1,*, Waqar Asrar1, Erwin Sulaeman1
ICMAAE21-66: A Review on Generation and Mitigation of Airfoil Self-Induced Noise

1International Islamic University Malaysia

2.20 – 2.40 pm

Indranil Ghosh 1, M.S.H. Chowdhury 1,*, Suazlan Mt Aznam 1

ICMAAE21-77: New Iterative Method (NIM): A Semi-Analytic Solution for Rössler System

1International Islamic University Malaysia

2.40 – 3.00 pm

Moumen Idres1,*, Ahmad Hazwan Mohd Nizum1, Wan Muhammad Adam Wan Mohamad Fathi1, Mohamed Okasha1,2
ICMAAE21-126: Optimization of Fuel Economy for A Multimode Plug-In Hybrid Electric Vehicle

1International Islamic University Malaysia, 2United Arab Emirates University

3.00 – 3.20 pm

Jalal Mohammed Zayan, Akbar John*, Abdul Khaliq Rasheed, Batoul Alallam, Mohammed Khalid and Ahmad Faris Ismail, Hamzah Salleh
ICMAAE21-131: EARLIER DENATURATION OF DNA BY USING NOVEL TERNARY HYBRID NANOPARTICLES

International Islamic University Malaysia

3.20 – 3.40 pm

 
Back to the top

Day 2: Session 7

SESSION 7 (ICMAAE ROOM A)

Modelling & Simulation

Tuesday, June 22: 12:00 – 1.00pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Assoc. Prof. Dr. Salmiah Ahmad

Asst. Prof. Dr. Nabilah Ramli

4.00 – 4.20 pm

Rully Medianto1, Naflah M. Adinda1, Yazdi I. Jenie1,Hisar Pasaribu1,Hari Muhammad
ICMAAE21-65: Terminal Control Area Complexity Measurement Using Simulation Model

1Bandung Insitute of Technology

4.20 – 4.40 pm

Mohd Zul Amzar Zulkifli1, Azfarizal Mukhtar1,*, Muhammad Faizulizwan Mohamad Fadli1, Anis Muneerah
Shaiful Bahari1, Halina Misran1
ICMAAE21-45: CFD Simulation of CO2 and Methane Adsorption at Various Temperature for MOF-5 using Dual-site and Single-site Langmuir Model

1Universiti Tenaga Nasional

4.40 – 5.00 pm

S. Y. Cetin1,  M. A. Maleque2* and H.H. Masjuki1,
ICMAAE21-42: Simulation of Wear Map for Biodiesel Interacted Automotive Materials

1International Islamic University Malaysia

5.00 – 5.20 pm

Hazril Md Isa1, Salamiah Ahmad1, Muhammad. Abdullah1, Ataur Rahman1, N. M. A. Ghani2, N.M. M.Noor3   
ICMAAE21-69: Modelling and Analysis of Pedals Pressing Mechanism for Low Speed Driving in Road Traffic Delay

1International Islamic University Malaysia, 2University Malaysia Pahang,
3University Technology MARA

Back to the top

SESSION 7 (ICMAAE ROOM B)

Aerospace Structures III

 

Wednesday, June 23: 4:00 – 5.20pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Mohd Farid Bin Aladdin

Asst. Prof. Dr. Norfazrina Hayati Binti Mohd Yatim

4.00 – 4.20 pm

Tengku Muhammad Afif, Mohamed Ali Jaffar Syed, Erwin Sulaeman and Meftah Hrairi
ICMAAE21-109: Finite Element Analysis of Composite Laminates under Electromechanical Load

International Islamic University Malaysia

4.20 – 4.40 pm

Sharifah Nadhirah Syed Abd Rahman, Mohamed Ali Jaffar Syed and Mohamed Sultan Ibrahim Shaik Dawood

ICMAAE21-110: Crash Analysis of Aircraft Composite Fuselage under Belly Landing

International Islamic University Malaysia

4.40 – 5.00 pm

Muhammad Rahman, S Alsubari, Mohamed Ali Jaffar Syed, Meftah Hrairi
and Mohd Sultan Ibrahim Shaik Dawood
ICMAAE21-128: Assessment of Shell Theories for Cross-Ply and Angle-Ply Laminated Cylindrical Shells under Thermo-Mechanical Loads

International Islamic University Malaysia

5.00 – 5.20 pm

Mohamed Ali Jaffar Syed, Wan Muhammad Hafizuddin W Embong W Embong and Abdul Aabid
ICMAAE21-112: Effect of Cut-Out Shape on the Stresses in Aircraft Wing Ribs

International Islamic University Malaysia

Back to the top

SESSION 7 (ICMAAE ROOM C)

Structures & Materials V

Wednesday, June 23: 4:00 – 5.20pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Assoc. Prof. Dr. Mohd Sultan Ibrahim

Asst. Prof. Dr. Syed Noh Syed Abu Bakar

4.00 – 4.20 pm

Zahir Hanouf, Ahmed Abdelrhman and Kartini Ahmad
ICMAAE21-27: An Investigation of Dynamic Structural Modification of A Machine Casing

Bahrain

4.20 – 4.40 pm

A.N. Md Idriss1 and S. Kasolang1,2
ICMAAE21-57: Dry Sliding Wear of Open Cell Aluminum Foam Against Mild Steel and Their Observed Surface Profile Under The Downlight and 45O Light.

1Universiti Teknologi MARA

4.40 – 5.00 pm

A. N. Md Idriss1, M. A. Maleque1, A. Afiq2
ICMAAE21-34: The Effect of Working Distances on The Formation of Tic Composite Surface Hardening Using Tig Melting Technique

1International Islamic University Malaysia, 2TNB Research Bhd

5.00 – 5.20 pm

N. Haris, and E. Sulaeman

ICMAAE21-83: Convergence of a high order non-prismatic slender Beam Finite Element using Galerkin’s approach.
                                                                                                                                                                       International Islamic University Malaysia

Back to the top

SESSION 7 (ICMAAE ROOM D)

Structures & Materials VI

Wednesday, June 23: 4:00 – 5.20pm (Asia / Kuala Lumpur GMT +8)

Chairman

Co- chairman:

Asst. Prof. Dr. Amelda Dianne Andan

Asst. Prof. Dr. Fatimah Dzaharudin 

4.00 – 4.20 pm

Ahmed Ouezgan1, Mouad Bellahkim1, Said Adima1, Aziz Maziri1, El Hassan Mallil1, Jamal Echaabi1.
ICMAAE21-75: Resin Film infusion process: Numerical Algorithm

1Université Hassan II de Casablanca

4.20 – 4.40 pm

Md Abdul Maleque, M. Fariszuddin Fariszuddin, A. Afiq and H H Masjuki
ICMAAE21-59: Hybrid Composite Coating for High Temperature Application
                                                                                                                                                                       International Islamic University Malaysia

4.40 – 5.00 pm

Aisyah Madihah Mustafa1, Najlah Sakinah Shahruddin1, Nor Farah Huda Abd Halim1*,
Alya Nayli Rozhan1, Maziati Akmal Hattiar1
ICMAAE21-104: The Effect of Cutting Speeds on Tool Wear and Surface Roughness when Milling Carbon Fiber Reinforced Polymer (CFRP)

1International Islamic University Malaysia

5.00 – 5.20 pm

Atifatul Ismah Binti Ismail1, Sher Afghan Khan1, Parvathy Rajendaran2 and Erwin Sulaeman1
ICMAAE21-81: Effect Of Cavities In Suddenly Expanded Flow At Supersonic Mach Number

1International Islamic University Malaysia, 2Universiti Sains Malaysia

Back to the top